7 Tielman Roos St, Germiston
+27 11 065 2300
+27 66 019 7557
info@flowtite-sa.co.za

Products

HomeProducts

Flowtite South Africa

Flowtite South Africa GRP pipes and pipe systems

Flowtite filament wound pipes are built as a structural sandwich, using the Flowtite continuous filament winding technology. The basic raw materials used in manufacturing the pipes are resin, glassfibers and silica sand.

Flowtite pipe systems are supplied in nominal diameters ranging from DN 100 up to DN 4000, and in various stiffness classes starting at 2500 N/m². Our standard pressure classes go up to 32 bar. The product portfolio includes a wide range of pipes, fittings and spools with additional custom designed solutions. In South Africa we manufacture nominal diameters ranging from DN 300 up to DN 1800 in various stiffness and up to PN32

Flowtite GRP pipes
SEWER PIPE
Flowtite South Africa

Filament wound Flowtite pipe designed for exceptional acid resistance. Typically used for sewer and storm water applications. Water jetting resistant according to DIN 19523.

Diameter range (DN)300-1800 mm
Pressure (PN)PN6 to PN32
Effective lengthStandard lengths are 12m and other lengths on request.
Stiffness (SN)2500, 5000 & 10000 N/m²
PRESSURE PIPE
Flowtite South Africa

Flowtite pipe with main reinforcement in the hoop direction. Used in applications without pressure end thrust, for example penstocks, pressure mains, water supply, and cooling water.

Diameter range (DN)300-1800 mm
Pressure (PN)PN6 to PN32
Effective lengthStandard lengths are 12m and other lengths on request.
Stiffness (SN)2500, 5000 & 10000 N/m²
FLOWTITE GREY
Flowtite South Africa

Coming soon to the South African market.

FLOWTITE ORANGE
Flowtite South Africa

Coming soon to the South African market.

Flowtite couplings
PRESSURE COUPLING
Flowtite South Africa

Commonly used for penstocks, water supply, irrigation and pressure sewer applications.

Diameter range (DN)100-4000 mm
Pressure (PN)PN6 – PN32*
Angular deflection*up to 3°

* Contact sales for further information

** The degree of angular deflection is dependent on the pipe diameter. Contact your local supplier for more information.

PRESSURE COUPLING ANGLED (FPCA)
Flowtite South Africa

Flowtite coupling for increased angular deflections up to 3 degrees.

Diameter range (DN)DN300-DN1700
Pressure (PN)PN6 – PN32*
Angular deflection**up to 3°

* Contact sales for further information

** The degree of angular deflection is dependent on the pipe diameter. Contact your local supplier for more information.

Flowtite flush joints
GRP SLEEVE
Flowtite South Africa

Commonly used for jacking and relining.

Diameter range (OD)272-3600 mm
Pressure (PN)up to 6 bar
STAINLESS STEEL SLEEVE
Flowtite South Africa

Commonly used for jacking and relining.

Diameter range (OD)272-3600 mm
Pressure (PN)up to 6 bar
STAINLESS STEEL AND RUBBER SLEEVE
Flowtite South Africa

Commonly used for jacking and relining.

Diameter range (OD)272-2500 mm
Pressure (PN)up to 16 bar

Standard fittings

Flowtite fittings can be produced in both standard and non-standard forms to customer specifications and are available for pressure and non-pressure applications. They are designed based on an extensive research program and patented concepts, have a high stiffness, and are corrosion-free. Amiblu’s researchers have rigorously analysed critical strains in bends, tees, and elbows.

ELBOW
Flowtite South Africa
Diameter range (DN)300 – 1800
Pressure (PN)up to 32 bar
REDUCER
Flowtite South Africa
Diameter range (DN)300 – 1800
Pressure (PN)up to 32 bar
TEE
Flowtite South Africa
Diameter range (DN)300 – 1800
Pressure (PN)up to 32 bar
FLANGE
Flowtite South Africa
Diameter range (DN)300 – 1800
Pressure (PN)up to 32 bar
WYE
Flowtite South Africa
Diameter range (DN)300 – 1800
Pressure (PN)Up to 10 bar
CUSTOMISED FITTINGS

A variety of specialized fittings can be made to order to suit your requirements please contact our sales department to assist you.

Manholes

Flowtite GRP manholes are made of glassfiber reinforced unsaturated polyester resin. They include a liner with glassfiber reinforcements for an expected higher chemical pollution of municipal wastewater. Shaft and chamber units comply with the requirements of EN 14364 and EN 15383 for underground drainage and sewage.

Flowtite manholes are custom-tailored to all sorts of operation requirements. In the case of deep installations as required e.g. on landfill sites, the manholes are designed with a bigger wall thickness to increase the structural stability.

STANDARD MANHOLE
Flowtite South Africa

Manholes are designed according to custom requirements.

Diameter manhole800-3000 mm
INSPECTION MANHOLE

Manholes are designed according to custom requirements.

Diameter manhole800-3000 mm